Reliant Octel 200 and Octel 300 Message Servers PB6001401 - Manual (Page 378)

8-8 Installation and Maintenance Volume
Octel Overture 200/300 Serenade 3.0 PB60014–01
Table 8-2 Hardware Error Types and Remedies (continued)
Error Type:Name Priority Remedy Source
DATA-1 = FAILURE CODE :
01 = INSIDE CABINET TEMPERATURE MEASUREMENT IS OUT OF
RANGE.
10 TO 50 C (50 F TO 122 F)
DATA-2 = REASON:
01 =
TEMPERATURE TOO HIGH
02 = TEMPERATURE TOO LOW
02 = +5 DIGITAL VOLTAGE MEASUREMENT IS OUT OF RANGE
+4.75 TO +5.25
DATA-2 = REASON:
00 =
VOLTAGE OUT OF RANGE (DIRECTION
UNKNOWN)
01 = VOLTAGE TOO HIGH
02 = VOLTAGE TOO LOW
03 = +12 ANALOG VOLTAGE MEASUREMENT IS OUT OF RANGE
+10.80 TO +13.20
DATA-2 = SAME AS FOR 02
04 = –12 ANALOG VOLTAGE MEASUREMENT IS OUT OF RANGE
–13.20 TO –10.80
DATA-2 = SAME AS FOR 02
05 = +12 MOTOR VOLTAGE MEASUREMENT IS OUT OF RANGE
+11.40 TO +12.60
DATA-2 = SAME AS FOR 02
06 = +5 BATTERY VOLTAGE MEASUREMENT IS OUT OF RANGE
+3.60 TO MINIMUM
DATA-2 = SAME AS FOR 02
0A = –5 ANALOG VOLTAGE MEASUREMENT IS OUT OF RANGE
–5.50 TO –4.50
DATA-2 = SAME AS FOR 02
15: System Status
Error (continued)
Temperature or
voltage out of range Check DATA-1 for information pertaining
to what is out of range and perform
corrective action.* 3
0B = +5 ANALOG VOLTAGE MEASUREMENT IS OUT OF RANGE
+4.40 TO +5.50
DATA-2 = SAME AS FOR 02
0C = DISK SHUTDOWN CAUSED BY OUT OF RANGE TEMPERATURE
41 F to greater than 131 F (5 TO 55 C.)
DATA-2 = REASON
01 = SUCCESSFUL SHUTDOWN
02 = FAILED TO SHUT DOWN