Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 496)

App.F-1
IM 11B08A01-01E
Appendix F GC File Converter (GCFC)
GC File Converter (GCFC) software converts a chromatogram fi le, which is stored in the
PC Analyzer Server (PCAS) and Analyzing Server Engineering Terminal (ASET) (single
mode), into a fi le readable by EZChrom*
* EZChrom is a chromatography data system from Agilent Technologies, which collects, processes, and controls analysis data of
chromatographs.
 Installation of GCFC
This section describes how to install GCFC in a PC.
This description assumes that your PC system is as follows and that you fully understand how to
use it.
 System Conditions
Check that the operating system is one of the following:
Microsoft Windows XP Professional SP3 (32-bit, Japanese or English)
Microsoft Windows Server 2008 SP2 (32-bit, Japanese or English)
Microsoft Windows 7 Professional (32-bit, Japanese or English)
Check that the hardware meets the following conditions:
OS Windows XP Windows Server 2008 Windows 7
CPU Pentium II 350 MHz or
faster
CPU 2 GHz or faster CPU 1 GHz or faster
Memory At least 128 MB At least 2 GB At least 1 GB
Hard disk At least 3 MB of free space (for the program only)
There must be suffi cient space on the hard disk to store data, in addition to the space for the
program.
 Installation procedure
Insert the installation CD into the CD-ROM drive.
The installation program starts automatically (or click on GCFC.exe instead).
Then follow the instructions of the wizard.
IMPORTANT
Administrator rights are required for installing and operating GCFC. Operation cannot be ensured
for other log-in accounts without administrator rights.
 Startup
GCFC can be started by clicking Windows’ Start button, selecting All Programs, and clicking on
GCFC.exe in the GCFC group.
Or, if there is a GCFC shortcut icon on the desktop, you can double-click it instead.
Figure 1 GCFC shortcut icon
2nd Edition : May 11, 2012-00
App.F