Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 193)

<4. GC-HMI (touch panel)>
4-6
IM 11B08A01-01E
Table 4.3 Setting Screens and User Levels
Setting screen
User level
Reference
A B C C+
General Setting
User Level Setting
4.1.1 General Setting Analyzer Setting
EhteLCD
GC-HMI Setting
Network Settings — —
4.1.2 GC-HMI Setting
Display Setting —
GC-HMI Reset — —
Communication Management — — — —
GC8000 Setting
Reload Initial Database —
4.1.3 GC8000 Setting Parameter Import — —
Parameter Export — — — —
Alarm Setting Clear Alarm Status — — — 4.1.4 Alarm Setting
Alarm Popup Restriction — —
—: Cannot be selected.
4.1.1 General Setting
This section describes the General Setting of the setting screen.
Figure 4.5 General Setting
 User Level Setting
User levels are set to defi ne the scope of operations allowed for each user.
The default setting is user level A, which only allows the user to view screens.
The user levels for analyzer operation data display and EtherLCD are independent from each
other, and they must be set separately.
2nd Edition : May 11, 2012-00