Yokogawa GC8000 Process Gas Chromatograph - Manual (Page 216)

<4. GC-HMI (touch panel)>
4-29
IM 11B08A01-01E
 Measurement status
Select the desired measurement status of the active GCM from the following:
Stream sequence: Measurement will be executed in the order of stream sequence specifi ed
here. After the selection, set the sequence number (1 to 8).
Figure 4.34
Specify str: The stream specifi ed here will be measurement. After the selection,
set the stream number (1 to 31) and the number of repetitions (0 for
continuous, or 1 to 9999).
Figure 4.35
2nd Edition : May 11, 2012-00
4