beautypg.com

Delta Electronics High-Speed PCI 12-Axis Motion Control Card PCI-DMC-A01 User Manual

Page 522

background image

Chapter 41 Speed Continue API | PCI-DMC-A01 / PCI-DMC-B01

41-6

Revised March, 2012

NOTE

When axes 1 ~ 6 carry out Speed Continue, the resources of axes 7 ~ 12 will be used.

Thus, when axes 1~6 are set to Speed Continue Enable, axes 7~12 cannot perform
P2P and Continue motions.
Speed Continue must be disabled for axes 7 ~ 12 to carry out further motions.


This manual is related to the following products: