Delta Electronics High-Speed PCI 12-Axis Motion Control Card PCI-DMC-A01 - Manual (Page 360)

Chapter 25 Remote Module Control API | PCI-DMC-A01 / PCI-DMC-B01
25-6 Revised March, 2012
25.5 _DMC_01_set_rm_output_value_error_handle
 FORMAT
I16 PASCAL _DMC_01_set_rm_output_value_error_handle(U16 CardNo, U16 NodeID,
U16 SlotID,U16 port,U16 value)

Purpose
Sets the output value returned when remote I/O module encounters an error.

Parameters
Name Data Type Unit Description
CardNo U16 Number Unit CardNo is between 0~15
NodeID U16 Number Unit Node ID
SlotID U16 Number Unit Slot ID
port U16 Selection
0: Port 0
1: Port 1
2: Port 2
3: Port 3
value U16 Selection
0: When an error occurs, the error output value
will be reset to 0
1: When an error occurs, retain the value until
system is powered off

Example
U16 CardNo=0;
U16 NodeID=1;
U16 SlotID=0;
U16 Port=0;
U16 Value=1;
I16 status = _DMC_01_set_rm_output_value_error_handle(CardNo, NodeID, SlotID, port,
Value);