Avago Technologies LSI53C1010R - Manual (Page 26)

1-8 Introduction
Version 2.2 Copyright © 2000–2003 by LSI Logic Corporation. All rights reserved.
•
Includes 8 Kbytes of internal RAM for SCRIPTS instruction storage
for each SCSI channel.
•
Supports 31 levels of SCSI synchronous offset in the
Single Transition (ST) mode and 62 levels in the DT mode.
•
Supports variable block size and scatter/gather data transfers.
•
Performs sustained Memory-to-Memory DMA transfers to
approximately 100 Mbytes/s.
•
Minimizes the SCSI I/O start latency.
•
Performs complex bus sequences without interrupts, including
restoring data pointers.
•
Reduces Interrupt Service Routine (ISR) overhead through a unique
interrupt status reporting method.
•
Includes SCSI Interrupt Steering Logic (SISL) for RAID Ready SCSI
on mainboard applications with a separate interrupt for routing to a
RAID adapter.
•
Supports Load/Store SCRIPTS instructions to increase the
performance of data transfers to and from the chip registers without
using PCI cycles.
•
Includes SCRIPTS support of 64-bit addressing.
•
Supports target disconnect and later reconnect with no interrupt to
the system processor.
•
Supports multithreaded I/O algorithms in SCSI SCRIPTS with fast
I/O context switching.
•
Supports expanded Register Move instruction to support additional
arithmetic capability.
1.6.2 PCI Performance
The LSI53C1010R:
•
Complies with PCI 2.2 specification.
•
Supports a 64-bit/66 MHz PCI interface for 528 Mbyte/s bandwidth that:
– Can function in a 32-bit or 64-bit PCI slot
– Operates at 33 or 66 MHz