Avago Technologies 3ware 9650SE-12ML User Manual
3ware, 9650se serial ata raid controller
This manual is related to the following products:
Table of contents
Document Outline
- Table of Contents
- About this Guide
- Chapter 1. Getting Started
- Chapter 2. Installing Your 3ware RAID Controller
- Tools You Need
- Before You Start
- Step 1 (9650SE-2LP). Connect the Cables to the Controller
- Step 1 (Multi-lane Controllers). Connect the Cables to the Controller
- Step 2. Install the Controller in the Computer
- Step 3. Connect the Cables to the Drives
- Step 3. Connect Cables to the SATA/ SAS Drive Multi-Lane Backplane
- Step 4. Connecting Drive Activity LED Indicators (Optional)
- Step 5. Finishing Up the RAID Controller Installation
- Step 6. Configure Your RAID Arrays
- Chapter 3. Installing the Battery Backup Unit
- Appendix: Technical Support