Avago Technologies LSI53C1010R - Manual (Page 107)

SCSI Bus Interface Signals 3-13
Version 2.2 Copyright © 2000–2003 by LSI Logic Corporation. All rights reserved.
3.4.2 SCSI Function B Signals
This section describes the SCSI Function B Signals group. Table 3.11
describes the SCSI Function B Signals and Table 3.12 describes the
SCSI Function B Control Signals.
Table 3.11 SCSI Function B Signals
Name Bump Type Strength Description
B_SD[15:0]
−
D8, E8, C6, A3, B21,
D19, E18, A19, E13,
A12, B11, B10, D10,
C9, D9, B8 I/O SE:
48 mA
SCSI
LVD:
12 mA
UniLVD
SCSI Function B Data.
LVD Mode: Negative half of the LVD Link
pair for the SCSI data lines. B_SD[15:0]
−
form the 16-bit SCSI data bus.
SE Mode: B_SD[15:0]
−
form the 16-bit
SCSI data bus.
B_SD[15:0]+ B7, B6, B5, A4, A23,
B20, A20, B19, E12,
B12, D11, C10, E11,
E10, B9, A8 I/O SE:
48 mA
SCSI
LVD:
12 mA
UniLVD
SCSI Function B Data.
LVD Mode: Positive half of the LVD Link
pair for the SCSI data lines.
B_SD[15:0]+ form the 16-bit data bus.
SE Mode: B_SD[15:0]+ are at 0 V.
B_SDP[1:0]
−
A7, D12 I/O SE:
48 mA
SCSI
LVD:
12 mA
UniLVD
SCSI Function B Parity.
LVD Mode: Negative half of the
LVD Link pair for the SCSI parity lines.
B_SDP[1:0]
−
are the SCSI data parity
lines.
SE Mode: B_SDP[1:0]
−
are the SCSI
data parity lines.
B_SDP[1:0]+ E9, C13 I/O SE:
48 mA
SCSI
LVD:
12 mA
UniLVD
SCSI Function B Parity.
LVD Mode: Positive half of the LVD Link
pair for the SCSI parity lines.
B_SDP[1:0]+ are the SCSI data parity
lines.
SE Mode: B_SDP[1:0]+ are at 0 V.