Avago Technologies LSI53C1010R - Manual (Page 234)

4-116 Registers
Version 2.2 Copyright © 2000–2003 by LSI Logic Corporation. All rights reserved.
Registers: 0xC8–0xCB
Remaining Byte Count (RBC)
Read/Write
RBC Remaining Byte Count [31:0]
This register contains the byte count that remains for the
BMOV that was executing when the phase mismatch
occurred. In the case of Direct or Indirect BMOV
instructions, the upper byte of this register also contains
the opcode of the BMOV that was executing. In the case
of a Table Indirect BMOV instruction, the upper byte
contains the upper byte of the Table Indirect entry that
was fetched.
In the case of a SCSI data receive, this byte count
reflects all data received from the SCSI bus, including
any byte in
SCSI Wide Residue (SWIDE) . There is no
data remaining in the part that must be flushed to
memory with the exception of a possible byte in the
SWIDE register. That byte must be flushed to memory
manually in SCRIPTS.
In the case of a SCSI data send, this byte count reflects
all data sent out onto the SCSI bus. Any data left in the
part from the phase mismatch is ignored and
automatically cleared from the FIFOs.
31 0
RBC
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0