Yaskawa MEMOCON GL120 - Manual (Page 66)

System Components: Functions and Specifications
4.2.3 Specifications of Power Supply Modules
— 4-10 —
4.2.3 Specifications of Power Supply Modules
1. Specifications of PS10 (Model No. JRMSP-120CPS11300)
PS10 specifications are shown in the following table.
Table 4.3 Specifications of PS10
Item Specifications
Input Rated Voltage 100/200 VAC (Selectable) p
Permissible Voltage Range 85 to 132 VAC or 170 to 264 VAC
Rated Frequency 50/60 Hz
Permissible Frequency
Range
47 to 63 Hz
Permissible Momentary Pow-
er Interruption Time
Less than one cycle. Momentary power interrup-
tion intervals must be 1 s min.
Wave Distortion Factor 10% or less
Power Consumption 1) At 100 VAC: 100 VA max.
2) At 200 VAC: 120 VA max.
Current Leakage 1) At 132 VAC: 1.4 mA max.
2) At 264 VAC: 2.8 mA max.
Inrush Current 1) At 132 VAC, cold start: 25 A max.
2) At 264 VAC, cold start: 50 A max.
No. of Phases Single-phase
Output Char-
i i
Rated Voltage 5.1 VDC p
acteristics
Rated Current 7.0 A
Fuse Standard fusing glass tube fuse (250 VAC, 3.15 A)
Field Wiring Terminals 1) Equipped with three types of terminals: field
wiring terminals (AC1, AC2), filter ground
terminal (ACG), and protective ground terminal
(FG).
2) M4 Phillips screws are used for the terminals.
3) Use wire size 1.5 mm 2 (AWG16) to 2.5 mm 2
(AWG13) to connect to the terminals.
Hot Swapping
(Removal/Insertion Under Power)
Not permitted.
Maximum Heating Value 20 W
Approximate Mass 600 g
External Dimensions Width: 1 81 mm
Height: 130 mm
Depth: 103.9 mm
4