Yaskawa MEMOCON GL120 - Manual (Page 159)

4.4 Communications Modules
— 4-103 —
Name Features Model
No.
Model Name
YENET
1600-D
Module
YENET
1600-D
JAMSC-
12NDN
31110
1) Used for high-speed data communications between PLCs.
2) Serves as a station of the YENET 1600-D System.
3) Up to 63 YENET 1600-D Modules (slaves) can be connected to each
YENET 1600-D Module (master).
4) Can be connected to masters and slaves conforming to the DeviceNet
protocol.
5) Uses special YENET 1600-D cables as transmission cables.
6) Can be mounted to any Rack.
Ethernet
Interface
Module
EIF JAMSC-
12NET
12100
1) Used for data communications between PLCs.
2) Serves as an interface for connections in Ethernet network systems.
3) Connects and communications with up to 19 Modules for each Ethernet
Interface Module.
4) Provides a 10Base-5 port and a 10Base-T port.
5) Mounted to CPU Rack.
Optical/
Electrical
Conversion
Module
O/E CON-
VERT
JAMSC-
120NAH
93500
1) Used in combination with PC Link Module or Remote I/O Module to configure
an Optical PC Link system or Optical Remote I/O system.
2) Equipped with an electric port for connecting PC Link Module or Remote I/O
Module, and two optical ports for connecting pairs of Optical/Electrical
Conversion Modules.
3) Enables duplex optical communications paths.
4) The following optical fiber cables are used as transmission cables:
H-PCF cables
Quartz crystal fiber cables
5) Can be mounted to any Rack.
Refer to the following manuals for details on Communications Modules.
• MEMOCON GL120, GL130 Coaxial Remote I/O System User’s Manual (SIEZ-C825-70.8)
• MEMOCON GL120, GL130 1000/2000-Series Coaxial Remote I/O System User’s Manual
(SIEZ-C825-70.9)
• MEMOCON GL120, GL130 COM Instruction User’s Manual (SIEZ-C825-70.14)
• MEMOCON GL120, GL130 PC Link Module User’s Manual (SIEZ-C825-70.4)
• MEMOCON GL120, GL130 Uniwire Interface Module User’s Manual (SIEZ-C825-20.26)
4