Yaskawa MEMOCON GL120 - Manual (Page 383)

!
Installation and Wiring
5.2.3 Installing the CPU and the Power Supply Module cont.
— 5-26 —
Caution Do not mount more than one CPU Module and Expander Modules on a single Mounting
Base.
Mounting more than one CPU Modules and Expander Module on a single Mounting Base
may damage the CPU Modules and Expander Module or cause malfunction of the
GL120 and GL130.
Use the following procedures to install the Power Supply Module, CPU Module and the
Expander Module on the Mounting Base.
a) Turn OFF the power to the Power Supply Modules.
b) Remove the cover from the Module connector on the Mounting Base.
Module hook
Module connector
c) Install the Module on the Mounting Base as shown below.
(1) Hook the Module to the Module hook on the Mounting Base.
Module hook
Module
connector
Mounting Base
PS10
5