Yaskawa MEMOCON GL120 - Manual (Page 190)

System Components: Functions and Specifications
4.4.5 MEMOBUS Modules (RS-232) cont.
— 4-134 —
Example 2
When the DIP switch is set as shown in the diagram at the right, the ME-
MOBUS Module (RS-232) is set as follows:
• Communications parameters of port 2 are set to the defaults.
• Communications parameters of port 1 are set to the defaults.
• Port 2 is in transparent mode.
• Port 1 is in transparent mode.
• Port 2 is combined master/slave port.
• Port 1 is combined master/slave port.
• Module number: 2
• Normal operation mode
5) Reset Switch
a) Press the reset switch at the following times:
(1) When you have changed the setting of DIP switch pin 7 or 8.
(2) When errors have occurred.
b) When the reset switch is pressed, communications between the MEMOBUS Module
(RS-232) and connected devices will be interrupted. Communications will restart
when the switch is released.
6) Related Manuals
Before operating your MEMOBUS Module (RS-232), read the following manual carefully
and be sure that you fully understand the information on specifications, applications
methods, safety precautions, etc.
MEMOCON GL120, GL130 COM Instructions User’s Manual (SIEZ-C825-70.14)
4
12
345678
O N