Yaskawa MEMOCON GL120 - Manual (Page 28)

Overview
— 2-4 —
Use Features Name
Optional Communications
Module
1) Remote I/O Driver Module:
Used as the master station of a Remote I/O system.
2) Remote I/O Receiver Module:
Used as the slave station of a Remote I/O system.
3) 2000-Series Remote I/O Driver Module:
Used as the master station of a Remote I/O system for 2000 I/O.
4) MEMOBUS Module (RS-232):
Used to increase the number of RS-232C MEMOBUS ports.
5) MEMOBUS Module (RS-422):
Used to increase the number of RS-422 MEMOBUS ports.
6) PC Link Module:
Used for high-speed communications between PLCs.
7) Uniwire Interface Module:
Used as the master station of a Uniwire system.
8) Uniwire H-system Interface Module:
Used as the master station of a Uniwire H-system.
9) Distributed I/O Driver Module:
Used as the master station of the VINUS I/O system.
10) M-NET Module:
Used for high-speed communications between PLCs.
11) YENET 1600-D Module:
Used for high-speed communications between PLCs.
12) Ethernet Interface Module:
Used for communications between PLCs.
13) Optical/Electrical Conversion Module:
Used for an Optical PC Link system or an Optical Remote I/O system.
Optional I/O Module 1) Digital Input Module:
Used to input digital signals.
2) Analog Input Module:
Used to input analog signals.
3) Digital Output Module:
Used to output digital signals.
4) Analog Output Module:
Used to output analog signals.
2