Yaskawa MEMOCON GL120 - Manual (Page 46)

System Components
— 3-12 —
Product Number
of Slots
Required
Features Model
Number
Model Name Name
Other
Modules
Expander
Module
EXPANDER JAMSC-
120CBE37000
Used to add Racks. 1
od es
Battery
Module
BATTERY JRMSP-
120XCP96000
Used to back up encoder data when Motion
Control Module and SERVOPACK are com-
bined to control a servomotor with an absolute
encoder.
---
MEMOBUS
PLUS Hub
Module
MEMOPLUS-
HUB
JAMSC-
120XCA39300
Used in MEMOBUS PLUS network to:
1) Connect trunk cables to each other.
2) Connect trunk cables to branch cables.
---
2000 Series
Modem
Module
J2078 DISCT-J2078 1) Used when MEMOBUS communications
cable exceeds 15 meters.
2) Uses shielded twisted-pair cables as
inter-modem transmission cables.
---
Mount-
ing
Bases
6-slot
Mounting
Base
MB06 JRMSI-
120XBP00600
1) Used to mount Modules.
2) Number of slots
---
8-slot
Mounting
Base
MB08 JRMSI-
120XBP00800
2) Number of slots
MB06: 6 slots
MB10: 10 slots
MB12: 12 slots
---
10-slot
Mounting
Base
MB10 JRMSI-
120XBP01000
MB12: 12 slots
MB16: 16 slots
3) Up to four Mounting Bases can be used for
---
12-slot
Mounting
Base
MB12 JRMSI-
120XBP01200
3) Up to four Mounting Bases can be used for
each station on the local or a remote
channel.
---
16-slot
Mounting
Base
MB16 JRMSI-
120XBP01600
---
Table 3.2 Overview of System Components: Cables
Product Name Model
Name
Model
Number
Features Cable
Length
Rack-to-
Rack
W0100 Cable W0100-02 JZMSZ-
120W0100-02
1) Used to connect to Expander Modules mounted
on adjacent Racks.
0.2 m
ac
I/O
Cables
W0100-05 JZMSZ-
120W0100-05
on adjacent Racks.
2) Up to three cables can be used for each station of
0.5 m
W0100-10 JZMSZ-
120W0100-10
2) Up to three cables can be used for each station of
the local or a remote channel. The total cable
length must be 6.0 meters or less. 1.0 m
W0100-15 JZMSZ-
120W0100-15
length must be 6.0 meters or less.
1.5 m
W0100-20 JZMSZ-
120W0100-20
2.0 m
W0100-30 JZMSZ-
120W0100-30
3.0 m
W0100-40 JZMSZ-
120W0100-40
4.0 m
W0100-50 JZMSZ-
120W0100-50
5.0 m
3