Yaskawa MEMOCON GL120 - Manual (Page 369)

Installation and Wiring
5.1.7 Module Mounting Dimensions
— 5-12 —
5.1.7 Module Mounting Dimensions
1) When the Modules shown in Table 5.3 are installed in a control panel, the depth of the
control panel necessary to mount a Module (dimension D) is as follows:
a) D for a Mounting Base mounted to a device mounting steel plate (dimension D1):
Dimension D1 = (depth of the Module) + 17 mm
Refer to Table 5.3 and Example 1.
b) D for a Mounting Base mounted to DIN track (Dimension D2):
Dimension D2 = (depth of the module) + 17 + 6 mm
Refer to Table 5.3 and Example 2.
Table 5.3 Module Mounting Depths
Name Depth of Module (mm) Module Mounting Depth p ( )
Dimension D1
(mm)
Dimension D2
(mm)
Power Supply Modules 103.9 Approx. 121 Approx. 127
CPU Modules 103.9 Approx. 121 Approx. 127
MEMOBUS Modules 103.9 Approx. 121 Approx. 127
I/O Modules with Terminal
Blocks
32-point I/O Modules
103.9 Approx. 121 Approx. 127
Counter Modules
Uniwire Interface Modules
103.9 Approx. 121 Approx. 127
Uniwire H-System Interface
Modules
Expander Modules
103.9 Approx. 121 Approx. 127
Example 1
Mounting Base Mounting Base
Example 2
Power Supply
Module
Power Supply
Module
Device
mounting
steel
plate
Device
mounting
steel
plate
(Dimension D1) (Dimension D2)
Approx. 121 Approx. 127
DIN track
103.9 103.9
5