Yaskawa MEMOCON GL120 - Manual (Page 420)

5.3 Panel Wiring
— 5-63 —
c) Yaskawa W0302 32-point I/O Module Cables
d) Yaskawa W0301 32-point I/O Module Cables
3) If I/O signal cables are manufactured by the user, use the following electric cables and
connectors:
a) Cable size: 0.08 mm 2 (AWG28)
b) Module connector: 10140-6000EL + 10340-55S0-008-F (3M)
4) When an W0300 32-point I/O Module Cable is used, select the appropriate cable from
the 3 cables shown in the following table:
Table 5.11 W0300 32-point I/O Module Cables
Item Specifications
Name W0300 Cable
Model Name W0300-01 W0300-03 W0300-05
Model No. JZMSZ-120W0300-01 JZMSZ-120W0300-03 JZMSZ-120W0300-05
Length (L) 1.0 m 3.0 m 5.0 m
Cable Specifications Shielded cable of 40 conductors, corresponding to UL20276, AWG28
(0.08 mm 2 )
Terminals Module
Side
Connector: 10140-6000EL + 10340-55S0-008-F (3M)
External
Device
Side
Loose wires; Cable length: 150 mm, pin number labeled on each wire
As shown in the figure below, the external device side of the W0300 cable is divided into
individual wires. The cable size is 0.08 mm
2 .
Connector (Module side) Separate wires
(external device side)
Pin number is attached to each wire.
Shielded cable
Cable description
40 separate
wires
150 mm
5) When a W0302 32-point I/O Module cable is used, select the appropriate cable from the 3
cables shown in the following table:
5