Yaskawa MEMOCON GL120 - Manual (Page 387)

Installation and Wiring
5.2.4 Installing the Terminal Block for Field Connection Module cont.
— 5-30 —
2) Loosen the terminal block mounting screws as shown below, and then remove the termi-
nal block from the Module.
Terminal block mounting screw
Terminal block
mounting screw
Terminal block
Module
3) Install the Module on the Mounting Base as shown below.
a) Hook the Module to the Module hook on the Mounting Base.
Module
Module hook
Module
connector
Mounting Base
b) Rotate the Module until it comes into contact with the Mounting Base.
Module
Module hook
Module
connector
Rotate
5