Yaskawa MEMOCON GL120 - Manual (Page 403)

!
!
Installation and Wiring
5.2.7 Installing the Motion Module cont.
— 5-46 —
d) Tighten the Module mounting screw on the MC15 Module.
Module mounting screw
(M4, Phillips)
MC15
3) Connecting the cables
Caution When connecting the cables to the Motion Module, turn OFF the Power Supply Module on the
rack having the Motion Module mounted.
Connecting the cables to the Motion Module while power is being supplied to the Power
Supply Module may damage the Module or cause malfunction of the GL120 and GL130.
Caution Make sure that all cable connectors for the Motion Module are securely inserted and tight-
ened.
Make sure that all cable connectors for Modules are securely inserted and tightened so
that they do not become loose. Loose connectors may cause malfunction of the GL120
and GL130.
The following shows the cable connection to the Motion Module.
a) Check that the Module is installed on the Mounting Base.
b) Turn OFF the power to the Power Supply Module mounted on the rack having Motion
Module mounted.
c) Insert the cable to the Module connector.
d) Tighten the connector fixing screw on the connector.
5