Yaskawa MEMOCON GL120 - Manual (Page 245)

4.4 Communications Modules
— 4-189 —
2. Function
The YENET 1600-D Module functions as station of a YENET 1600-D System.
3. Specifications
1) Module Specifications
Table 4.77 Specifications of YENET 1600-D Module
Item Specifications
Name YENET 1600-D Module
Model Name YENET 1600-D
Model No. JAMSC-120NDN31110
External dimensions Width: 40.3 mm
Height: 130 mm
Depth: 103.9 mm
Approximate Mass 300 g
Internal Current Consumption 250 mA
Maximum Heating Value 1.9 W
Hot Swapping
(Removal/Insertion Under
Power)
Permitted
External Power Supply Voltage For communication: 24 VDC, 25 mA
External Connections Removable terminal block for field connections (5-pin with flange,
made by Phoenix Contact Co, model number MSTB2.5/5-STF-5.08)
Mounting Location Any slot of any Rack
Communications
Port
S
Connection
Method
Multi-drop, T-branch (1:N)
o
Specifications
Baud Rate 500, 250, or 125 Kbps (selectable)
Transmission
Medium
Special 5-wire cable (2 signal lines, 2 power lines, 1 shield), or 3-wire
cable (separate power cable required)
Transmission
Distance
Baud Rate Network Length
(Max.)
Drop Line
Length (Max.)
Total Drop Line
Length (Max.) s a ce
500 Kbps 100 m 6 m 39 m
250 Kbps 250 m 6 m 78 m
125 Kbps 500 m 6 m 156 m
Node
Address
0 to 15
Number of
Units
Connected
63 max.
Status
Information
Can be monitored in Monitor Mode
Transmission
Error
Detection
CRC errors, duplicate node address check
2) I/O Specification
The YENET 1600-D Module operates in Master Mode or Slave Mode according to set-
tings made from the MEMOSOFT.
4