Yaskawa MEMOCON GL120 - Manual (Page 421)

Installation and Wiring
5.3.3 Wiring Digital I/O Modules cont.
— 5-64 —
Table 5.12 W0302 32-point I/O Module Cables
Item Specifications
Name W0302 Cable
Model Name W0302-01 W0302-03 W0302-05
Model No. JZMSZ-120W0302-01 JZMSZ-120W0302-03 JZMSZ-120W0302-05
Length (L) 1.0 m 3.0 m 5.0 m
Cable Specifications Shielded cable of 40 conductors, corresponding to UL20276, AWG28
(0.2 mm 2 )
Terminals Module
Side
Connector: 10140-6000EL + 10640-5500-008 (3M)
External
Device
Side
Loose wires; Cable length: 150 mm, pin number labeled on each wire
As shown in the figure below, the external device end of the W0302 cable is divided into
individual wires. The cable size is 0.2 mm
2 .
Connector 1 (Module side)
Cable description
Shielded cable
Pin number is attached to each wire.
Separate wires
(external device end)
40 separate
wires
6) When a W0301 32-point I/O Module cable is used, select the appropriate cable from the 3
cables shown in the following table:
Table 5.13 W0301 32-point I/O Module Cables
Item Specifications
Name W0301 Cable
Model Name W0301-01 W0301-03 W0301-05
Model No. JZMSZ-120W0301-01 JZMSZ-120W0301-03 JZMSZ-120W0301-05
Length (L) 1.0 m 3.0 m 5.0 m
Cable Specifications Shielded cable of 40 conductors, corresponding to UL20276, AWG28
(0.08 mm 2 )
Terminals Module
Side
Connector: 10140-6000EL + 10640-5500-008 (3M)
External
Device
Side
Connector: FCN-361J040-AU + FCN-360C040-E (Fujitsu)
5