Yaskawa MEMOCON GL120 - Manual (Page 44)

System Components
— 3-10 —
Product Number
of Slots
Required
Features Model
Number
Model Name Name
Special
Purpose
Modules
High-speed
Counter
Module
(1 channel)
COUNTER-
1CH
JAMSC-
120EHC21110
1) Used to count high-speed pulses.
2) Incorporates a high-speed pulse count
circuit.
3) Can be used for both A- and B-phase
pulses and sign + pulse counting.
4) Can count the following frequencies:
A/B-phase pulses: 200 kpps (1X)
400 kpps (2X)
800 kpps (4X)
Sign + pulse: 200 kpps (1X)
5) Notch point outputs: 4 points
1
Pulse Catch
Module
COUNTER-
16CH
JAMSC-
120RD134400
1) Equipped with pulse catch and counter
functions.
2) The pulse catch function is used to read
input signals that are ON less than one scan
time of the CPU Module.
ON signal width: 1 ms min. (8 channels)
2 ms min. (16 channels)
3) Equipped with 16 built-in pulse catch
circuits.
4) Can count the following frequencies:
8 channels: 500 Hz
16 channels: 250 Hz
1
Register Input
Module
REGISTER-IN JAMSC-
120RDI34410
1) Input the maximum value of 8 or 16
channels, and 16 bit or the 4 digits of BCD.
2) Can choose the following input cycle.
8 channels: 10/32/64/192/320 ms
16 channels: 20/64/128/384/640 ms
1
Register
Output Module
REGISTER-
OUT
JAMSC-
120RDO34410
1) Output the maximum value of 8 or 16
channels, and 16 bit or the 4 digits of BCD.
2) Can choose the following input cycle.
8 channels: 10/32/64/192/320 ms
16 channels: 64/128/384/640 ms
1
3