Syntax, Command mode, Default configuration – Dell POWEREDGE M1000E User Manual
Page 996: User guidelines, Example

996
IPv6 Routing Commands
Syntax
show ipv6 mld-proxy
Command Mode
Privileged EXEC mode
Default Configuration
There is no default configuration for this command.
User Guidelines
The command displays the following parameters only when you enable MLD
Proxy:
Example
console#show ipv6 mld-proxy
Field
Description
Interface Index
The interface number of the MLD Proxy interface.
Admin Mode
Indicates whether MLD Proxy is enabled or disabled. This is a
configured value.
Operational Mode Indicates whether MLD Proxy is operationally enabled or
disabled. This is a status parameter.
Version
The present MLD host version that is operational on the proxy
interface.
Number of
Multicast Groups
The number of multicast groups that are associated with the
MLD-Proxy interface.
Unsolicited Report
Interval
The time interval at which the MLD-Proxy interface sends
unsolicited group membership reports.
Querier IP Address
on Proxy Interface
The IP address of the Querier, if any, in the network attached to
the upstream interface (MLD-Proxy interface).
Older Version 1
Querier Timeout
The interval used to timeout the older version 1 queriers.
Proxy Start
Frequency
The number of times the MLD-Proxy has been stopped and
started.
2CSPC4.XModular-SWUM200.book Page 996 Thursday, March 10, 2011 11:18 AM