Show ip ospf interface brief, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual
Page 1131: Command mode, User guidelines, Example, Show ip ospf interface stats, Show ip ospf interface, Brief, Stats
OSPF Commands
1131
show ip ospf interface brief
Use the show ip ospf interface brief command in Privileged EXEC mode to
display brief information for the IFO object or virtual interface tables.
Syntax
show ip ospf interface brief
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays brief information for the IFO object or virtual
interface tables.
console#show ip ospf interface brief
Router Hello Dead Retrax Retrax LSAAck
Interface AdminMode Area ID Priority Intval Intval Intval Delay Intval
--------- --------- ------- -------- ------ ------ ------ ----- ------
vlan1
Enable
0.0.0.10 1
10
40
5
1
1
vlan2
Disable
0.0.0.0
1
10
40
5
1
1
vlan3
Disable
0.0.0.0
1
10
40
5
1
1
loopback2 Disable
0.0.0.0
1
10
40
5
1
1
show ip ospf interface stats
Use the show ip ospf interface stats command in User EXEC mode to display
the statistics for a specific interface. The information is only displayed if
OSPF is enabled.
Syntax
show ip ospf interface stats vlan
vlan-id
2CSPC4.XModular-SWUM200.book Page 1131 Thursday, March 10, 2011 11:18 AM