Dell POWEREDGE M1000E - Manual (Page 1123)

OSPF Commands 1123
Default Metric Type............................ Non-
Comparable
Translator Role................................ Candidate
Translator Stability Interval.................. 2000
Translator State............................... Disabled
show ip ospf asbr
The show ip ospf asbr command displays the internal OSPF routing table
entries to Autonomous System Boundary Routes (ASBR). This command
takes no options.
Syntax
show ip ospf asbr
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
console#show ip ospf asbr
Type Router Id Cost Area ID Next Hop Next Hop
Intf
----- ---------- ---- -------- ----------- -----------
INTRA 1.1.1.1 1 0.0.0.1 10.1.12.1 vlan10
INTRA 4.4.4.4 10 0.0.0.1 10.1.24.4 vlan12
2CSPC4.XModular-SWUM200.book Page 1123 Thursday, March 10, 2011 11:18 AM