Command groups – Dell POWEREDGE M1000E User Manual
Page 74
74
Command Groups
Command Groups
The system commands can be broken down into three sets of functional
groups, Layers 2, Layer 3, and Utility.
Table 1-1. System Command Groups
Command Group
Description
Configures connection security including authorization
and passwords.
Configures and displays ACL information.
Configures bridging address tables.
Configures Auto VoIP for IP phones on a switch.
Configures Cisco Discovery Protocol (CDP).
Provides priority-based flow control that can pause
(inhibit transmission) of individual priorities within a
single physical link.
Enables the Layer 2 DHCP Relay agent for an interface.
Configures DHCP snooping and whether an interface is
trusted for filtering.
Dynamic ARP Inspection Configures for rejection of invalid and malicious ARP
packets.
Ethernet Configuration Configures all port configuration options for example
ports, storm control, port speed and auto-negotiation.
Configures and displays GVRP configuration and
information.
Configures IGMP snooping and displays IGMP
configuration and IGMP information.
IGMP Snooping Querier Configures IGMP Snooping Querier and displays IGMP
Snooping Querier information.
Configures and manages IP addresses on the switch.
Configures and displays ACL information for IPv6.
Configures IPv6 MLD Snooping.
2CSPC4.XModular-SWUM200.book Page 74 Thursday, March 10, 2011 11:18 AM