Dell POWEREDGE M1000E - Manual (Page 231)

AAA Commands 231
User Guidelines
This command has no user guidelines.
Example
console#configure
console(config)#aaa ias-user username client-1
console(Config-IAS-User)#password client123
console(Config-IAS-User)#no password
Example of a adding a MAB Client to the Internal user database:
console#configure
console(config)#aaa ias-user username 1f3ccb1157
console(Config-IAS-User)#password 1f3ccb1157
console(Config-IAS-User)#exit
console(config)#
password
(Line Configuration)
Use the password command in Line Configuration mode to specify a
password on a line. To remove the password, use the no form of this
command.
NOTE: For commands that configure password properties, see Password
Management Commands on page 1389.
Syntax
password password [encrypted]
no password
• password — Password for this level. (Range: 8- 64 characters)
• encrypted — Encrypted password to be entered, copied from another
switch configuration.
2CSPC4.XModular-SWUM200.book Page 231 Thursday, March 10, 2011 11:18 AM