Dell POWEREDGE M1000E - Manual (Page 121)

Command Groups 121
IP Routing
Command Description Mode a
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
encapsulation Configures the link layer encapsulation type for
the packet.
IC
ip address Configures an IP address on an interface. IC
ip mtu Sets the IP Maximum Transmission Unit
(MTU) on a routing interface.
IC
ip netdirbcast E nables the forwarding of network-directed
broadcasts.
IC
ip route Configures a static route. Use the no form of
the command to delete the static route.
GC
ip route default Configures the default route. Use the no form
of the command to delete the default route.
GC
ip route distance Sets the default distance (preference) for static
routes.
GC
ip routing Globally enables IPv4 routing on the router. GC
routing Enables IPv4 and IPv6 routing for an interface. IC
show ip brief Displays all the summary information of the IP. PE
show ip interface Displays all pertinent information about the IP
interface.
PE
show ip protocols Displays the parameters and current state of the
active routing protocols.
PE
show ip route Displays the routing table. PE
show ip route preferences Displays detailed information about the route
preferences.
PE
show ip route summary Shows the number of all routes, including best
and non-best routes.
PE
show ip traffic Displays IP statistical information. UE or
PE
show ip vlan Displays the VLAN routing information for all
VLANs with routing enabled.
PE
2CSPC4.XModular-SWUM200.book Page 121 Thursday, March 10, 2011 11:18 AM