Dell POWEREDGE M1000E - Manual (Page 587)

Port Channel Commands 587
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
No specific guidelines.
Example
console#show interfaces port-channel
Channel Ports Hashing-mode
------- --------------------------------------- ------------
po Active: 1/e1, 2/e2 1
po2 Active: 2/e2, 2/e7 Inactive: 3/e1 2
po3 Active: 3/e3, 3/e8 3
po4 No Configured Ports 5
po5 No Configured Ports 6
po6 No Configured Ports 4
po7 No Configured Ports 3
po8 No Configured Ports 3
Hash algorithm type
1 - Source MAC, VLAN, EtherType, source module and port Id
2 - Destination MAC, VLAN, EtherType, source module and port Id
3 - Source IP and source TCP/UDP port
4 - Destination IP and destination TCP/UDP port
5 - Source/Destination MAC, VLAN, EtherType and source MODID/port
6 - Source/Destination IP and source/destination TCP/UDP port
show lacp
Use this command in Privileged EXEC mode to display LACP information
for Ethernet ports.
2CSPC4.XModular-SWUM200.book Page 587 Thursday, March 10, 2011 11:18 AM