Dell POWEREDGE M1000E - Manual (Page 634)

634 QoS Commands
show class-map
Use the show class-map command in Privileged EXEC mode to display all
configuration information for the specified class.
Syntax
show class-map [ classname ]
• classname — Specifies the valid name of an existing DiffServ class.
(Range: 1–31 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays all the configuration information for the class
named "Dell".
console#show class-map
Class L3
Class Name Type Proto Reference Class Name
------------------------------- ----- ----- -----------------------
------
ipv4 All ipv4
ipv6 All ipv6
stop_http_class All ipv6
match_icmp6 All ipv6
console#show class-map ipv4
2CSPC4.XModular-SWUM200.book Page 634 Thursday, March 10, 2011 11:18 AM