Dell POWEREDGE M1000E - Manual (Page 843)

Template Last Updated - 2/7/2007 DHCPv6 Commands 843
D EL L C O NF I D E N TI A L – P R EL I M I N A RY 3 /1 0 / 1 1 - F O R P R O O F O N LY
42
DHCPv6 Commands
This chapter explains the following commands:
clear ipv6 dhcp
Use the clear ipv6 dhcp command in Privileged EXEC mode to clear
DHCPv6 statistics for all interfaces or for a specific interface.
Syntax
clear ipv6 dhcp {statistics | interface vlan vlan-id statistics}
• vlan-id — Valid VLAN ID.
• statistics — Indicates statistics display if VLAN is specified.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
clear ipv6 dhcp service dhcpv6
dns-server (IPv6 DHCP Pool Config) show ipv6 dhcp
domain-name (IPv6 DHCP Pool Config) show ipv6 dhcp binding
ipv6 dhcp pool
show ipv6 dhcp interface (User EXEC)
ipv6 dhcp relay show ipv6 dhcp interface (Privileged
EXEC)
ipv6 dhcp server show ipv6 dhcp pool
prefix-delegation show ipv6 dhcp statistics
2CSPC4.XModular-SWUM200.book Page 843 Thursday, March 10, 2011 11:18 AM