Dell POWEREDGE M1000E - Manual (Page 1192)

1192 OSPFv3 Commands
Syntax
show ipv6 ospf interface [interface-type interface-number]
Syntax Description
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the information in VLAN 11’s virtual
interface tables.
console#show ipv6 ospf interface vlan 11
IP Address..................................... Err
ifIndex........................................ 1
OSPF Admin Mode................................ Enable
OSPF Area ID................................... 0.0.0.0
Router Priority................................ 1
Retransmit Interval............................ 5
Hello Interval................................. 10
Dead Interval.................................. 40
LSA Ack Interval............................... 1
Parameter Description
interface-type The interface type, VLAN, tunnel or loopback
interface-number The valid interface number, a valid VLAN ID, tunnel identifier
(Range: 0–7) or loopback identifier (Range: 0–7).
2CSPC4.XModular-SWUM200.book Page 1192 Thursday, March 10, 2011 11:18 AM