Dell POWEREDGE M1000E - Manual (Page 824)

824 DHCP Server and Relay Agent Commands
ip dhcp bootp automatic
Use the ip dhcp bootp automatic command in Global Configuration mode
to enable automatic BOOTP address assignment. By default, BOOTP clients
are not automatically assigned addresses, although they may be assigned a
static address. Use the no form of the command to disable automatic BOOTP
client address assignment. Use the show ip dhcp global configuration
command to display the automatic address assignment configuration.
Syntax
ip dhcp bootp automatic
no ip dhcp bootp automatic
Parameter Description
This command does not require a parameter description.
Default Configuration
Automatic BOOTP client address assignment is disabled by default.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
console#ip dhcp bootp automatic
ip dhcp conflict logging
Use the ip dhcp conflict logging command in Global Configuration mode to
enable DHCP address conflict detection. Use the no form of the command to
disable DHCP conflict logging.
Syntax
ip dhcp conflict logging
2CSPC4.XModular-SWUM200.book Page 824 Thursday, March 10, 2011 11:18 AM