Dell POWEREDGE M1000E - Manual (Page 1040)

1040 Multicast Commands
--------------- --------------- --------------- ----------
1.1.1.1 255.255.255.0 2.2.2.2 23
show ip pim bsr-router
The show ip pim bsr-router command displays information about a bootstrap
router (BSR). This command deprecates the show ip pimsm componenttable
and show ip pimsm bsr commands.
Syntax
show ip pim bsr-router
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC, Privileged EXEC mode
User Guidelines
The following information is displayed:
Example
console#show ip pim bsr-router
Field Description
BSR address IP address of the BSR.
BSR Priority The configured BSR priority.
BSR Hash Mask Length The configured hash mask length (32 bits maximum).
Next Bootstrap Message
in
Time remaining (in hours, minutes, and seconds) until a
BSR message is sent.
Next Candidate RP
Advertisement
Time remaining (in hours, minutes, and seconds) until the
next RP advertisement is sent.
2CSPC4.XModular-SWUM200.book Page 1040 Thursday, March 10, 2011 11:18 AM