Dell POWEREDGE M1000E - Manual (Page 1121)

OSPF Commands 1121
Syntax
show ip ospf abr
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
There are no user guidelines for this command.
Example
console#show ip ospf abr
Type Router Id Cost Area ID Next Hop Next Hop
Intf
----- --------- ----- --------------- --------- --------
INTRA 3.3.3.3 1 0.0.0.1 10.1.23.3 vlan11
INTRA 4.4.4.4 10 0.0.0.1 10.1.24.4 vlan12
show ip ospf area
Use the show ip ospf area command in Privileged EXEC mode to display
information about the identified OSPF area.
Syntax
show ip ospf area area-id
• area-id — Identifies the OSPF area whose ranges are being displayed.
(Range: 0–4294967295)
Default Configuration
This command has no default configuration.
2CSPC4.XModular-SWUM200.book Page 1121 Thursday, March 10, 2011 11:18 AM