Dell POWEREDGE M1000E - Manual (Page 133)

Command Groups 133
OSPFv3
timers spf Configures the SPF delay and hold time. ROSPF
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
Command Description Mode a
area default-cost Configures the monetary default cost for the stub
area.
ROSV3
area nssa Configures the specified areaid to function as an
NSSA.
ROSV3
area nssa default-info-
originate
Configures the metric value and type for the
default route advertised into the NSSA.
ROSV3
area nssa no-redistribute Configures the NSSA ABR so that learned
external routes will not be redistributed to the
NSSA.
ROSV3
area nssa no-summary Configures the NSSA so that summary LSAs are
not advertised into the NSSA.
ROSV3
area nssa translator-role Configures the translator role of the NSSA. ROSV3
area nssa translator-stab-
intv
Configures the translator stability interval of the
NSSA.
ROSV3
area range Creates an area range for a specified NSSA. ROSV3
area stub Creates a stub area for the specified area ID. ROSV3
area stub no-summary Disables the import of Summary LSAs for the
stub area identified by areaid.
ROSV3
area virtual-link Creates the OSPF virtual interface for the
specified areaid and neighbor.
ROSV3
area virtual-link dead-
interval
Configures the dead interval for the OSPF virtual
interface on the virtual interface identified by
areaid and neighbor.
ROSV3
area virtual-link hello-
interval
Configures the hello interval for the OSPF virtual
interface on the virtual interface identified by
areaid and neighbor.
ROSV3
Command Description Mode a
2CSPC4.XModular-SWUM200.book Page 133 Thursday, March 10, 2011 11:18 AM