Dell POWEREDGE M1000E - Manual (Page 1479)

SNMP Commands 1475
192.122.173.42 Trap public 2 162 filt1 15 3
192.122.173.42 Inform public 2 162 filt2 15 3
Version 3 notifications
Target Address Type Username Security UDP Filter TO Retries
Level Port name Sec
-------------- ----- -------- -------- ---- ------ --- ------
192.122.173.42 Inform Bob Priv 162 filt31 15 3
System Contact: Robert
System Location: Marketing
show snmp engineID
Use the show snmp engineID command in Privileged EXEC mode to display
the ID of the local Simple Network Management Protocol (SNMP) engine.
Syntax
show snmp engineID
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the SNMP engine ID.
console# show snmp engineID
Local SNMP engineID: 08009009020C0B099C075878
2CSPC4.XModular-SWUM200.book Page 1475 Thursday, March 10, 2011 11:18 AM