Dell POWEREDGE M1000E - Manual (Page 417)

Ethernet CFM Commands 417
Syntax
traceroute ethernet cfm {mac mac-addr | remote-mpid 1-8191 } {domain
domain name | level 0-7 } vlan vlan-id mpid 1-8191 [ttl 1-255 ]
Parameter Description
Default Configuration
By default, the traceroute command will send loopback trace messages with a
TTL of 64.
Command Mode
Privileged EXEC
User Guidelines
This command has no user guidelines.
Example
console # linktrace src-mep 200 target-mep 400 ttl 64
Parameter Description
level Maintenance association level
mac-addr The destination MAC address for which the route needs to be
traced. Either MEP ID or the MAC address option can be used.
remote-mpid The MEP ID for which connectivity needs to be verified; i.e.
the destination MEP ID.
domain Name of the maintenance domain (an alphanumeric string of
up to 43 characters in length).
vlan-id A VLAN associated with the maintenance domain. Range: 1-
4094.
mpid The MEP ID from which the link trace message is to be
transmitted.
ttl Number of hops over which the LTM is expected to be
transmitted. The default is 64.
2CSPC4.XModular-SWUM200.book Page 417 Thursday, March 10, 2011 11:18 AM