Lldp, Multicast vlan registration – Dell POWEREDGE M1000E User Manual
Page 98

98
Command Groups
LLDP
Multicast VLAN Registration
Command
Description
Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
clear lldp remote-data
Deletes all data from the remote data table.
PE
clear lldp statistics
Resets all LLDP statistics.
PE
lldp notification
Enables remote data change notifications.
IC
lldp notification-interval
Limits how frequently remote data change
notifications are sent.
GC
lldp receive
Enables the LLDP receive capability.
IC
lldp timers
Sets the timing parameters for local data
transmission on ports enabled for LLDP.
GC
lldp transmit
Enables the LLDP advertise capability.
IC
lldp transmit-mgmt
Specifies that transmission of the local system
management address information in the
LLDPDUs is included.
IC
lldp transmit-tlv
Specifies which optional TLVs in the 802.1AB
basic management set will be transmitted in the
LLDPDUs.
IC
show lldp
Displays the current LLDP configuration
summary.
PE
show lldp interface
Displays the current LLDP interface state.
PE
show lldp local-device
Displays the LLDP local data.
PE
show lldp remote-device
Displays the current LLDP remote data.
PE
show lldp statistics
Displays the current LLDP traffic statistics.
PE
Command
Description
Mode
a
mvr
Enables MVR.
GC or
IC
mvr group
Adds an MVR membership group.
GC
mvr mode
Changes the MVR mode type.
GC
2CSPC4.XModular-SWUM200.book Page 98 Thursday, March 10, 2011 11:18 AM