Dell POWEREDGE M1000E - Manual (Page 1122)

1122 OSPF Commands
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays OSPF router information.
console#show ip ospf area 10
AreaID......................................... 0.0.0.10
External Routing............................... Import
External LSAs
Spf Runs....................................... 0
Area Border Router Count....................... 0
Area LSA Count................................. 0
Area LSA Checksum.............................. 0
Import Summary LSAs............................ Enable
console#show ip ospf area 20
AreaID......................................... 0.0.0.20
External Routing............................... Import
NSSAs
Spf Runs....................................... 0
Area Border Router Count....................... 0
Area LSA Count................................. 0
Area LSA Checksum.............................. 0
OSPF NSSA Specific Information.
Import Summary LSAs............................ Enable
Redistribute into NSSA......................... Enable
Default Information Originate.................. TRUE
Default Metric................................. 250
2CSPC4.XModular-SWUM200.book Page 1122 Thursday, March 10, 2011 11:18 AM