Dell POWEREDGE M1000E - Manual (Page 114)

114 Command Groups
DHCP Server and Relay Agent (IPv4)
arp purge Causes the specified IP address to be removed
from the ARP cache.
PE
arp resptime Configures the ARP request response timeout. GC
arp retries Configures the ARP count of maximum request
for retries.
GC
arp timeout Configures the ARP entry age-out time. GC
clear arp-cache Removes all ARP entries of type dynamic from
the ARP cache.
PE
clear arp-cache
management
Removes all entries from the ARP cache learned
from the management port.
PE
ip local-proxy-arp Enables proxying of ARP requests. IC
ip proxy-arp Enables proxy ARP on a router interface. IC
show arp Displays the Address Resolution Protocol (ARP)
cache.
PE
show arp brief Displays the brief Address Resolution Protocol
(ARP) table information.
PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 77.
Command Description Mode a
ip dhcp pool Defines a DHCP address pool that can be used
to supply addressing information to DHCP
client. This command puts the user into DHCP
Pool Configuration mode.
GC
bootfile Sets the name of the image for the DHCP
client to load.
DP
clear ip dhcp binding Removes automatic DHCP server bindings. PE
clear ip dhcp conflict Removes DHCP server address conflicts. PE
client-identifier Identifies a a Microsoft DHCP client to be
manually assigned an address.
DP
client-name Specifies the host name of a DHCP client. DP
Command Description Mode a
2CSPC4.XModular-SWUM200.book Page 114 Thursday, March 10, 2011 11:18 AM