Dell POWEREDGE M1000E - Manual (Page 894)

894 IGMP Proxy Commands
show ip igmp-proxy groups
Use the show ip igmp-proxy groups command in Privileged EXEC mode to
display a table of information about multicast groups that IGMP Proxy
reported. It displays status parameters only when IGMP Proxy is enabled.
Syntax
show ip igmp-proxy groups
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example attempts to display a table of information about
multicast groups that IGMP Proxy reported.
console#show ip igmp-proxy groups
Interface Index................................ vlan13
Group Address Last Reporter Up Time Member State Filter Mode Sources
------------- --------------- ------- ------------ ----------- ------
225.0.1.1 13.13.13.1 7 DELAY-MEMBER Exclude 0
225.0.1.2 13.13.13.1 48 DELAY-MEMBER Exclude 0
show ip igmp-proxy groups detail
Use the show ip igmp-proxy groups detail command in Privileged EXEC
mode to display complete information about multicast groups that IGMP
Proxy has reported.
Syntax
show ip igmp-proxy groups detail
2CSPC4.XModular-SWUM200.book Page 894 Thursday, March 10, 2011 11:18 AM