Dell POWEREDGE M1000E - Manual (Page 642)

642 QoS Commands
show diffserv service interface
Use this command in Privileged EXEC mode to display policy service
information for the specified interface.
Syntax
show diffserv service interface {gigabitethernet unit/slot/port |
tengigabitethernet unit/slot/port } {in|out}
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
This command has no user guidelines.
Example
console#show diffserv service interface
gigabitethernet 1/0/1 in
DiffServ Admin Mode........................... Enable
Interface..................................... 1/0/1
Direction..................................... In
Parameter Description
in Show ingress policies.
out Show engress policies.
2CSPC4.XModular-SWUM200.book Page 642 Thursday, March 10, 2011 11:18 AM