Dell POWEREDGE M1000E - Manual (Page 644)

644 QoS Commands
show diffserv service brief
Use the show diffserv service brief command in Privileged EXEC mode to
display all interfaces in the system to which a DiffServ policy has been
attached.
Syntax
show diffserv service brief
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example shows how to display all interfaces in the system to
which a DiffServ policy has been attached.
console# show diffserv service brief
Interface Direction OperStatus Policy Name
----------- ----------- ------------ -------------------
1/0/1 in Down DELL
show interfaces cos-queue
Use the show interfaces cos-queue command in Privileged EXEC mode to
display the class-of-service queue configuration for the specified interface.
Syntax
show interfaces cos-queue [{gigabitethernet unit/slot/port | port-channel
port-channel-number | tengigabitethernet unit/slot/port }]
2CSPC4.XModular-SWUM200.book Page 644 Thursday, March 10, 2011 11:18 AM