Example #2, Example #3, Datacenter-bridging – Dell POWEREDGE M1000E User Manual

Page 304: Syntax, Default configuration, Command mode, User guidelines, Example

304

Data Center Bridging Commands

Example #2

console#clear priority-flow-control statistics port-

channel 1

Example #3

console#clear priority-flow-control statistics

datacenter-bridging

Use the datacenter-bridging command for an ethernet or port-channel

interface in order to enter the DataCenterBridging mode. Priority-Flow-

Control is configurable from within the DataCenterBridging mode.

Syntax

datacenter-bridging

Default Configuration

This command has no default configuration.

Command Mode

Interface Configuration (Ethernet, Port-channel) mode

User Guidelines

This command has no user guidelines.

Example

console#config

console(config)#interface range ethernet all

console(config-if)#datacenter-bridging

console(config-if-dcb)#priority-flow-control mode on

console(config-if-dcb)#priority-flow-control priority

1 no-drop

2CSPC4.XModular-SWUM200.book Page 304 Thursday, March 10, 2011 11:18 AM