Dell POWEREDGE M1000E - Manual (Page 1249)

Virtual Router Redundancy Protocol Commands 1249
Use the no form of this command to remove the route from the tracked list or
to restore the priority decrement to its default. When removing a tracked IP
route from the tracked list, priority should be incremented by the decrement
value if the route is not reachable.
Syntax
vrrp group track ip route ip-address/prefix-length [ decrement priority ]
no vrrp group track ip route ip-address/prefix-length
Parameter Description
Default Configuration
There are no routes tracked by default.
The default decrement priority is 10.
Command Mode
Interface Configuration (VLAN) mode.
User Guidelines
There are no user guidelines for this command.
Example
The following example adds the route 2.2.2.0/24 to the virtual router tracked
list (with a priority decrement value of 20).
console(config-if-vlan10)#vrrp 1 track ip route
2.2.2.0/24 decrement 20
Parameter Description
group The virtual router identifier. (Range: 1–255).
ip-address/prefix-length Specifies the route to be tracked.
priority Priority decrement value for the tracked route. (Range:
1–254).
2CSPC4.XModular-SWUM200.book Page 1249 Thursday, March 10, 2011 11:18 AM