Show isdp interface, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual

Page 298: Command mode, User guidelines, Example

298

CDP Interoperability Commands

Compiled Wed 21-Mar-07 12:20 by tinhuang

show isdp interface

The show isdp interface command displays ISDP settings for the specified

interface.

Syntax

show isdp interface { all | gigabitethernet

unit/slot/port

| tengigabitethernet

unit/slot/port

}

Default Configuration

There is no default configuration for this command.

Command Mode

Privileged EXEC mode

User Guidelines

There are no user guidelines for this command.

Example

console#show isdp interface all

Interface Mode

--------------- ----------

1/0/1 Enabled

1/0/2 Enabled

1/0/3 Enabled

1/0/4 Enabled

1/0/5 Enabled

1/0/6 Enabled

1/0/7 Enabled

2CSPC4.XModular-SWUM200.book Page 298 Thursday, March 10, 2011 11:18 AM