Show ip rip interface brief, Syntax, Default configuration – Dell POWEREDGE M1000E User Manual
Page 1226: Command mode, User guidelines, Example

1226
Routing Information Protocol Commands
Authentication Key............................. "pass123"
Authentication Key ID.......................... 35
Bad Packets Received........................... -----
Bad Routes Received............................ -----
Updates Sent................................... -----
show ip rip interface brief
Use the show ip rip interface brief command in Privileged EXEC mode to
display general information for each RIP interface. For this command to
display successful results routing must be enabled per interface (i.e. ip rip).
Syntax
show ip rip interface brief
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode.
User Guidelines
This command has no user guidelines.
Example
The following example displays general information for each RIP interface.
console#show ip rip interface brief
Send
Receive
RIP
Link
Interface
IP Address
Version
Version
Mode
State
---------- ----------
-------- ----------- --------- ----------
vlan1
0.0.0.0
RIP-2
Both
Disable
Down
vlan2
0.0.0.0
RIP-2
Both
Disable
Down
2CSPC4.XModular-SWUM200.book Page 1226 Thursday, March 10, 2011 11:18 AM