Dell POWEREDGE M1000E - Manual (Page 1629)

Web Server Commands 1625
ip http secure-port
Use the ip http secure-port command in Global Configuration mode to
configure a TCP port for use by a secure web browser to configure the switch.
To use the default port, use the no form of this command.
Syntax
ip http secure-port port-number
no ip http secure-port
Parameter Description
Default Configuration
This default port number is 443.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the https port number to 100.
console(config)#ip http secure–port 2
ip http secure-server
Use the ip http secure-server command in Global Configuration mode to
enable the switch to be configured, monitored, or modified securely from a
browser. To disable this function, use the no form of this command.
Parameter Description
port-number Port number for use by the secure HTTP server. (Range:
1–65535)
2CSPC4.XModular-SWUM200.book Page 1625 Thursday, March 10, 2011 11:18 AM